Ornaments for clothes made of cords

Send

Purists, relax! We decorate clothes and accessories with cords, gowns and K ° - the more confusing, the more spectacular.

Arabesque top with ornament
With the help of yarn, braid and fantasy, an intricate ornament will appear on the top.
YOU NEED: top, thin transparent silk size. 35 x 55 cm, black cord 5 mm thick, 1.30 m long. Black wool yarn of medium thickness. Sewing threads, magic crayon.

HOW TO MAKE: Before the top in the middle, fold the wrong side to the wrong side, mark the end of the seam. On the neckline, depart from the midline 7 cm, on the lower edge - 16 cm. Connect the points with a straight line. Before cut along this line. Use the cut part as a pattern for a part from silk, cut the part from silk with allowances in a circle of 1.5 cm.
The allowances for the lower and upper sections to wrap inward, tuck and stitch. Sew a piece of silk face to face on the edges of the front of the top, the width of the seam is 7 mm. Iron allowances on top. Pull the cord and wool yarn according to the photo of the model onto a piece of silk (for this it is better to put the top on a mannequin or on yourself) and sew it by hand.

In Harmony: iPad Case
The modern iPad looks great in a leather case with a floral pattern.
YOU WILL NEED: flesh-colored nappa leather, size 30 x 55 cm, black leather patches, cream-colored braid 1 cm wide, 50 cm long. Sewing threads, magic crayon.
HOW TO MAKE: from the skin, cut 2 parts for a cover 27 cm wide, 22 cm high. Fold the parts face to face and fasten with paper clips. Round off the lower corners slightly. In the middle of the top edge, mark the entrance with a width of 6 cm and a depth of 2 cm. Cut the hole, while slightly rounding the corners.
Cut curls from black leather and, according to the photo of the model, sew on the front side of the cover, see also the step-by-step instructions for the latest model (steps 1 and 2).
Cut the piece into pieces 20 cm and 30 cm long. Paste the pieces of the brace and grind according to the photo of the model.
Fold cover details face to face, grind side and bottom edges. Turn out. Sew with black thread at a distance of 5 mm from the top edge.

Ornate: Hair Hoop
Arabic satin ribbon yarn edged.
YOU NEED: a hair hoop with a width of approx. 5 cm, black satin size 15 x 45 cm, white ribbon yarn, flesh-colored satin ribbon 3 mm wide, 1.20 m long. Sewing threads, magic crayon, hot glue gun.
HOW TO MAKE: Put satin on the rim, wrap the edges on the inside of the rim and fix with paper clips. Cut the edges, not reaching 1 cm to the middle of the hoop. Finally, stick the remaining free side.
With magic chalk, draw curls according to the photo of the model. Tape yarn and satin ribbon together and sew manually according to the marking. Glue one edge. Satin lay around the ends of the rim and stick.

Fashionable growth: skirt with an asymmetric pattern
A little wild "bindweed" will not hurt this skirt!
YOU NEED: a skirt, rags of black and flesh-colored leather, white ribbon yarn, sewing threads, a “magic” felt-tip pen, pins, scissors.
STEP 1 On the seamy side of the skin flaps, draw curls with a “magic” felt-tip pen. Cut them with scissors.
STEP 2 Pin the cut curls to the front side of the skirt and sew using the special foot of the sewing machine to sew edging.
STEP 3 At the end, put the accents with white yarn, laying the thread along some curls. Pin the thread and sew it by hand.