Running to the beach!

You have not yet had time to acquire fashionable panties? With yarn, shreds and dyes, this can be done in two ways!

TOO EASY
Pantolets with orthopedic soles are very comfortable, but a little boring ... It's time to do them!

ROCK STAR
Many rivets of gold and silver color will delight fans of real rock.
You will need: pantolets, various rivets of gold and silver, an awl, pliers, an adhesive thermal gun.
How to do it: lightly push the rivets in the right place on the pantolets to mark their location. With an awl, make holes for them. Insert rivets into the holes and bend the ends on the back. Press the ends properly with pliers so that they do not rub your feet. In the area of ​​the sole of the rivet, glue it with a heat gun.



POP ART
Unleash your imagination: take skin paints and paint whatever your heart desires! Then coat the patterns with varnish.
You will need: pantolets, skin paint of 8 different tones, a suitable topcoat, waterproof marker.

How to do it: copy the motif (see right) and cut along the contour. Place a pantolet on the sole (in the mirror image) and repeat the contours with a marker. Draw inner lines by hand. Apply the paint with a brush, allow the paint to dry completely.
Primer the straps with white paint and allow it to dry completely.Then, by hand, arbitrarily apply motives with different paints, let the paints dry completely. Apply thin lines with a marker.
Fully painted pantolos varnish, including soles.




AND SIDE BOW
If you make holes on the pantolet thongs, you can thread shreds of fabric into them and tie bows in place of the buckles.
You will need: pantolets, rags of cotton fabric in flower size. OK. 20 x 60 cm. Hole punch.
How to do it: unfasten the fasteners on the straps and cut the ends of the straps in a straight line close to the buckles. On straps without buckles, also trim the ends in a straight line. Punch small holes along the edges of the straps with a hole punch (or pierce with an awl) at a distance of 5 mm, from the edge at a distance of 3 mm. At a distance of 1.5 cm from the upper edge of the straps, punch the second row of small holes. Punch a series of large holes at a distance of 8 mm from the edges of the straps, the distance between the holes is approx. 8 mm, the number of holes should be odd.
Cut the fabric into strips 2 cm wide: 4 strips 60 cm long, 4 strips 40 cm long. Shorter strips into large holes on shorter straps, longer ones into larger holes on longer straps. Start threading next to the sole, thread the ends of the strips from the inside out, one end through the upper, the other through the lower hole. Pull the ends of the strips at the ends of the straps to the upper side and tie a bow.


CROSS NAKREST
What could be easier than cross stitching! Only in this case will need awl. And the buckles also need to be tied with yarn.
You will need: pantolets, embroidery threads of 6 different colors, a needle for embroidery, an awl, pliers.
How to do: unfasten the buckles on the straps. On the inside of the straps without buckles, use a ballpoint pen to mark 6 rows of dots with an interval between the rows on the narrow side of approx. 5 mm and increasing the intervals towards the wide side, the distance between the points = 5 mm. To be able to freely adjust the length of the straps, break the rows of points in the fastening area of ​​the buckles.
With an awl, pierce holes on the marking. Embroider crosses with 5 different colors of embroidery, while using pliers to pull the needle. Tie the beginning and end of the thread with knots. At the end, tighten the buckles with threads, for which the beginning of the thread is tied with a knot on the buckle, and then knotted and the end of the thread.
Photo: Jan Schmidel. Design: Teresa Bahler, Lena Klippel.