How to make a hoop organizer

Send

Different cotton fabrics, a little non-woven fabric for reinforcing, a few machine lines - and ordinary hoops turn into a convenient and stylish wall-mounted sewing organizer!

The pink mini-needle-box made by hand also found its place on the hoop organizer. For storage of spools of thread, cloves are provided, which are fixed between the frames. The bottom pockets are trimmed with an old centimeter tape.

DIY needle and hook organizer

You will need:

• sewing threads in beige and fuchsia
• 3 parts from different fabrics: 35 x 35 cm (A), 22 x 35 cm (B) and 14 x 35 cm ©
• a piece of pink fabric for a needle bed 10 x 10 cm in size
• wooden embroidery hoop with a diameter of 25 cm
• button for tight
• flap of flizelin volumenfliza H 630 measuring 35 x 100 cm
• a piece of an old centimeter tape 40 cm long
• 5 nails
• needle for embroidery
• cutting scissors
• sewing embroidery machine
• iron
• glue

Step 1

On the wrong side of the parts, use a hot iron to iron the non-woven volumeflyz. Unscrew the cut along one long side of part B on the wrong side, 2 cm wide and secure with pins. Place part B on part A and pin with pins.

Step 2

Unscrew the cut along one long side of part C on the wrong side, 2 cm wide.On the front side, put on the old centimeter tape and pin it with pins.

Step 3

On the two pieces A and B cleaved together, place part C, slightly raising its upper edge from the plane, and fix it with pins so that pockets of sufficient volume to form objects are formed. On parts B and C, lay five parallel lines at intervals of approx. 4-6 cm.

Step 4

Gently pull the fabric on the hoop.

How to sew a sewing mini-organizer on hand: a master class

Step 5

Insert nails between the wooden frames. Adjust the nails by loosening the screw on the hoop. At a distance of 1.5 cm from the edge of the hoop, trim off excess fabric.

Step 6

Glue the fabric on the back of the frames in a circle.

Step 7

From a pink cloth, cut a circle with a diameter of approx. 1.5 cm larger than the diameter of the button for a close-fitting. Embroider any motif on the fabric manually or using a sewing-embroidery machine.

Step 8

Between the button and the fabric, insert a small piece of non-woven volumenfliz. Cloth the button in accordance with the manufacturer's instructions.